|
ELECTRICAL
HYDRAULIC DRIVE ROAD BLOCKER
¡@
Model¡GRB
-160H
|
|
|
|
|
|
Description
The Electrical Road Blocker
(RB-160B) series is designed to
secure areas from unauthorized
traffic area. It can be used in any
applications of where as the traffic
movement must be controlled such as:
¡EShopping
centers.
¡ECar
Parks
¡ECommercial
Buildings
¡EHospitals
¡EIndustrial
centers
|
|
Housing
The
frame & structure is fabricated
from mild steel & hot dip
galvanized in Yellow with black
stripes enamel coating. A surrounding
frame to be fitted on finished road
level as well as a concrete pit
suitably is required to install the
In-ground Electrical Road Blocker
(RB-160B).
|
|
Technology
The
electric motor mechanism with end
position limit switches. A special
hand tool can be manually raised or
lowered in the event of power failure.
|
|
Features
A special feature of electronic
devices can be applied to the unit by
means of card reader, radio
transmitters, key pads etc.
An unique safety device is designed to
detect the obstruction object whilst
raising. It will be fully operated if
the obstruction has been completely
removed.
|
|
Controller
The controller provides interfacing
from associated access control
devices to activate the electrical
road blocker. All inputs &
outputs are controlled through a 24
volt control board with all
necessary with most access control
devices on the market.
|
Technical
Data
|
| Height
of raised obstacle: |
330
mm |
| Length
of obstacle: |
2200
mm - 3500 mm (Optional length on
request). |
| Width
of obstacle: |
580
mm |
| Motor: |
Three Phase
asynchronous type. |
|
¡@ |
1100w
1420 rpm. |
| Power
Support: |
400V
Three phase 50/60Hz. |
| Power
consumption: |
In
stand-by mode 200W |
|
¡@ |
In
operation 1500W |
| Operation
temperature: |
-200
to 800 |
| Net
weight: |
Model
A: 300 Kg. |
|
¡@ |
Model
B: 340 Kg. |
| Operation
speed: |
3
seconds. |
| Overall
dimensions: |
Model
A ------------------------ 2200 mm. |
|
¡@ |
Model
B ------------------------ 3140 mm. |
|
|
|
|
