Description
 The pedestrian flap type turnstile is a user friendly access control developed for fast processing or people in areas such as railway platforms, passenger terminals, & sports stadiums.t
A modular front panel concept allows adaptation to a large variety of ticket readers for railway station use, as well as customized designs for all sorts of card readers for the security industry. The drive system incorporates a Magnetic Torque Motor with 100% Duty Cycle & constant torque output can be set low enough not to harm any person, negating the need for limit switches & slip clutches. This important feature eliminates the mechanical slip clutches. The motor is continuously powered (low consumption) so the drive system is always warm enough to prevent condensation & corrosion in cold, wet/humid installation environment. The swing gate can be made from a variety of materials with 15mm clear acrylic as standard & a patterned surface as an option.

  Technology
The torque drive mechanism operates in conjunction with a single lever arm against the turnstile, with a speed controlled motion & soft end-position approach. The lever arm geometry can be adjusted to lock the panels in the close position, or alternatively, to allow the panels to open after a specified force is applied.

  Reader Interface
  Compatible with access control system standards
- Serial interface
- Fieldbus cross linkage
  Special interfaces, signal exchange with building services automation & connection of customer supplied control elements available on request.
　

  Options
- Installation of card readers
- Signal equipment
- Control desk or panel for remote control (release & block)
- Mode selection switch
- Railing elements for flow guidance or as barrier in a suitable design
- Counting mechanism

  Controller
P.L.C. (Programmable logic controller)
An option for large & more complex installations_ Especially where more sophisticated interfacing, or emote monitoring is required. The custom hardware & software will be designed according to operational requirements.

  Finish
  -Stainless steel

  -Satin finish

Operation
  - Open ground state
The door leaves are being closed automatically as soon as a unauthorized passage is registered_
  - Closed ground state
The door leaves are being opened automatically in the resp. passage direction & then closed again.

Entry/Exit direction
- Clear
- Locked
- Electrically controlled by: Access control system.

i). Access control system.

ii). Manual.

In the event of power failure or emergency, the door leaves move freel